Hey guys! Long time no blog!!!Did you miss me?!?
I missed you!!
I have a great DIY for you today. Maybe my FIRST DIY?!?
What?!? Yup! I have turned into one of *those* ladies!!!
I make my own shit! (The Man helps! 😉)
So..... On to it!
The Ballet Barre!
I drew my plans and went to Lowes. Here's what I bought:
6 - 90 degree Elbow Joints
4 - T Joints
25 Feet of 1/4" Schedule 40 PVC (I got 5 5' poles)
Total price = $38 even
When we got home, The Man cut 6 12" pieces. 4 will be the feet and 2 will be the top supports. Starting with a elbow, go elbow, with a flat part touching the floor, 12" rod, T Joint, with the T facing up, 12" rod, elbow, with a flat touching the floor.
There! You just made the left foot!!!
Now do the same thing again. 2 feet!!!
Now, here is where I messed up. I had The Man cut 2 30" rods, which would be the bottom 2 supports. Now, that would have worked if I was an Amazon, but being 5'5..... It did not. The top bar was at my chin, swear.
They ended up being 19".
Basic rule is the top bar should be at your waist.
When you have the bottom 2 support rods cut correct, fit them in the feet T Joints and the add another T Joint on the tops.